MATERIAL OF OUR PRODUCT
,H section steel
H type steel is an economic efficient section material with optimized cross section area allocation and more reasonable ratio of strength to weight. It is named because of its letter "H" cross section. Since its different parts are of orthogonal configuration, h-beam has advantage of good bending capacity, simple construction, cost saving and structure light weight etc., has been widely used.
H-beam is divided into:
The flange wide type (HW)
The flange middle type (HM)
The narrow flange type (HN)
Thin-wall h-beam type (HT)
H section steel pile type (HU)
H-type steel, optimized from I-shaped steel, is economic cross section steel with better cross-section mechanical performance. Especially, it is named because of its letter "H" shape section.
Its characteristics are as follows:
1. Wide flange, large lateral stiffness and strong anti-bending ability.
2. Two parallel flange surfaces enable easy and simple connection, processing and installation.
3. Compared with welding joist steel, H-type has lower cost, high precision, small residual stress. There is no need for expensive welding material and welding seam detection, so the steel structure production is cost saving.
4. Under the same cross section load, reduction weight of hot rolled H-type steel structure can be lighter 15-20% more than the traditional steel structure.
5. Compared with concrete structure, hot rolled H steel structure can increase 6% using area. Meanwhile, its self-reduce weight also reduces the internal structure design force.
6. H section steel can be processed into T steel. Honeycomb beam can be formed into various sorts of cross section by combination, which greatly meets the demand of engineering design and production.
C steel was processed after hot rolling and cold bending. Its characteristics are: thin wall, light weight, good cross section performance, high strength (compared with the traditional steel) and can save 30% materials compared with the equivalent steel.
C type steel is widely used in purlin and wall beam steel structure building, also can combined into lightweight roof, carrier construction, etc. In addition, it can also be used for machinery and column, beam and arm light industrial manufacturing.
Usually steel structure building is a large installation engineering. Some customers may need SBS assign the professional technical engineer to supervise the installation on site overseas. To such situation, customer should coordinate with us for following aspects:
Customer should provide:
1. Translator or assistant on site.
2. All costs raised including:
A. visa fee
B. Round trip flight ticket
C. Accident insurance for the supervisor during the period
E. Daily meals
G. Local traffic fee (if any)
3. The customer should pay the engineer with supervision fee, which can be negotiated and decided by both.
4. Customer has the responsibility to provide necessary security system to protect the supervisor, especially in some unrest countries.
FOSHAN SHENGBANG STEEL STRUCTURE Co., Ltd
Add:Pingtang Industrial Park, Shipeng Village, Shishan Town, Nanhai District, Foshan, Guangdong Province,China